Coriolis is in a constant process of improving its machine. The new developments are designed to be also available on already installed machine, to keep them up to the latest technology.
CAILABS OPTIC
Click for details
- New compact optic made to extend the range of complex parts to layup.
- The weight of the support, and its simplicity, allow to get a more stable LASER spot
HMI V5
Click for details
- Latest version of the HMI, designed for a easier handling and a better layup experience.
- This HMI is a key to get access to the latest developments (CoDa, closed loop,…)
C1.1 Cutting Bloc V2
Click for details
- This update had been development to allow its dismounting without taking the mobile part of the head out.
AIR BLADES
Click for details
- Designed for TP layup, this new cooling system blows air at a high pressure on the roller.
- It extends the life expectancy of the roller significantly as it avoid any over heating of the material.
CLOSED LOOP
Click for details
- To optimize the heat provided by the LASER, its POWER is monitored in a closed loop based on the feedback from an IR camera.
Trajectory optimization
Click for details
- Following CORIOLIS development on the NC movement, this trajectory optimization allows to gain 0,8s at each tape.
Multi IR lamp system
Click for details
- To increase the control of the heat during TS layup, a multi-IR lamp system can be installed on the head.